H O W T O T E S T A V E H I C L E
|
|
|
This product is suitable for cars, caravans, fleet vehicles and motor-homes.
5D4D is a new innovative drug residue detection product which fits into the Health and Safety space, to test vehicles.
If you are a corporate company and you have fleet vehicles, under the health and safety legislation you need to be ensuring, that the equipment that you provide is safe and healthy.
As a second hand car purchaser, the last thing you want is a law suit based on providing or selling an unsafe vehicle and you don’t want to end up with a vehicle on your books that you can’t sell!
It is advised as a second hand car dealer that before taking any vehicle onto your lot, or agree to trade any vehicle in, you should be testing it, to make sure that there is not drug residue present, which could cause touch contamination to the purchaser.
So preliminary testing is a fantastic way for you to ensure you meet all your health and safety standards.
Use our D4D easy to use DIY drug residue test kit, which are affordable at $20 and will give a colour reaction result in 90 seconds.
If you are a corporate company and you have fleet vehicles, under the health and safety legislation you need to be ensuring, that the equipment that you provide is safe and healthy.
As a second hand car purchaser, the last thing you want is a law suit based on providing or selling an unsafe vehicle and you don’t want to end up with a vehicle on your books that you can’t sell!
It is advised as a second hand car dealer that before taking any vehicle onto your lot, or agree to trade any vehicle in, you should be testing it, to make sure that there is not drug residue present, which could cause touch contamination to the purchaser.
So preliminary testing is a fantastic way for you to ensure you meet all your health and safety standards.
Use our D4D easy to use DIY drug residue test kit, which are affordable at $20 and will give a colour reaction result in 90 seconds.
How to Test
- Open the foil packaging. Take all of the contents out of the pouch.(Test pen, colour chart, and two papers)
- Read instructions carefully before use
- Remove one test paper from the package, peel back the cover, wipe test paper on roof lining, boot and dashboard, collecting residue from the dustiest areas.
- When ready to colour test, take the other paper (control paper ) & peel back the cover, taking care not to touch or contaminate. Hold the tube upright, & squeeze to break the inside ampule of the test pen at ‘1’ where indicated.
- Hold the cap with your finger and shake well for 5 seconds. Once mixed with the active ingredient, tip the pen back and remove the small pen cap.
You are now ready to test. - Pointing the pen away from your body, drip 2 drips on the control paper, Drip the remaining drips on the paper used for testing. let it dry (90 sec)
- Compare test to control and if a colour variance is observed in the test check against the colour chart (not including dust) It is normal to get multiple colours on single tests.
- Only colours similar to the colour chart should be considered as positive results. It is normal to have anything from dirty dusty orange to bright orange.
- For each test a new test paper must be used.
- Once ampule is broken, the test should be used within 1 hour.
- Any positive colour reaction may take 90 seconds or slightly longer to fully develop, depending on the quantity and purity of the substance being tested.
- Used paper will gradually turn brownish as a result of oxidation.
- Discard test after use.
- Keep out of reach of children. In case of eye or skin contact, flush well with water.
Example Test Paper showing the potential presence of marijuana, amphetamine, and the potential presence of any of the following orange colouration triggers.
- Methamphetamine
- Pethidine
- Cathinone
- Ketamine
- Ephedrine
- Pseudoephedrine
If you have any queries or questions regarding our D4D preliminary drug residue detection kits please feel free to contact me.
Maureen Fraser - Maudd Limited
Maureen Fraser - Maudd Limited